Well the Resin was wetted out into the cloth inside the hull and it turned out well, as expected the very tip of the stems was a little work to get at, but it was ok. It was not recommended, but I put a small piece of cloth and resin it in early in both stems, similar to how it was done on the exterior of the hull. Only two coats of resin on the inside of the hull to avoid it becoming too slippery.
The resin has since been sanded with 80 and 120 grit paper and we are ready to movee onto the wood work of the gunnels and yokes and seats.
The unsightly stems did not turn out too badly, acceptable for the first canoe.
No comments:
Post a Comment